GI silver which is reinforced with spherical silver alloy has high compressive and adhesion to the tooth

Features:

• Capable to form satisfactory bonds with enamel and dentin, and releasing fluoride over a prolonged period.
• Promote good biological response (biocompatibility).
• Ammdent GI Silver has a coefficient of thermal expansion close to that of tooth structures.

Description:

GI silver which is reinforced with spherical silver alloy, has high compressive and adhesion to the tooth. It has excellent tooth adhesion, sustained fluoride release, and high compressive strength.

INDICATIONS :

• Core build-up.
• Restoration of primary teeth.
• As a base or liner.
• Class I, limited Class II(low stress-bearing areas), temporary fillings, etc.
• Intermediate restoratives and base material for class I and II cavities using the sandwich technique.
• Class V restorations in non-aesthetic situations.
• Restorative in the field using the ART technique.

ADVANTAGE : 

• Contains Spherical Silver – Tin Alloy.
• Micro Fine Powder.
• Strong Adhesion.
• Excellent Biocompatibility.
• High and continuous fluoride release.
• High compressive and Abrasion Strength.
• Premixed Silver Powder.

Key Specifications

Packaging:

• 1 x 10gm powder
• 1 x 4ml liquid
• 1 x Mixing pad
• 1 x Spatula

Directions To Use:

POWDER AND LIQUID DISPENSING:

• The recommended powder-to-liquid ratio is 2-level scoops of powder to 2-3 drops of liquid.
• MIXING: Dispense powder and liquid onto a pad or glass slab. Divide the powder into 2 equal parts.
• Mix the first portion with all of the liquid for 15-20 seconds.
• Incorporate the remaining portion and mix the whole thoroughly for 20 seconds.
• Note: A heavy consistency is recommended.

RESTORATIVE TECHNIQUE :

• Prepare teeth using standard techniques.
• Expensive mechanical retention is not necessary. For pulp capping, Use light cure calcium hydroxide paste as a base or liner.
• Wash and dry the prepared tooth structure but do not desiccate.
• Mix the required amount of cement.
• The working time is 1min.30 seconds at 23*C(73.4*F).
• Higher temperatures will shorten working time.
• Remove surface moisture.
• The setting time is 5 minutes 30 sec. from the start of mixing.

Warranty:

Warranty is not applicable for this product.

Manufacturer Registered Address:

AMRIT CHEMICALS AND MINERAL AGENCY
F-343, Industrial Area, Phase 8B, S.A.S. Nagar, Mohali. Punjab, India. (160071)

In Case of Complaints/Feedback Regarding Product:
Customer Care: +91 0172-509034, or write to ammdent@hotmail.com