Self Etch one component dental bonding agent

Features:

• Type: 7th generation, single-component, light-cured self-etch adhesive.
• Composition: Key ingredients include Urethane Dimethacrylate, Triethylene Glycol Dimethacrylate, Bisphenol A Diglycidyl Methacrylate, 2-Hydroxy Ethyl Methacrylate, photoinitiators, and stabilizers.
• Ease of Use: The all-in-one system saves chair time and reduces the risk of procedural errors due to its simplified application process.
• Reduced Sensitivity: Its self-etching properties use a mild acidic solution, which minimizes post-operative sensitivity often associated with traditional total-etch methods.
• Versatility: It offers reliable adhesion to both enamel and dentin and is compatible with a wide range of materials including composite resins, ceramics, and metal-based restorations (when used with a luting cement).

Description:

Ammdent Ammbond7 Self Etch Bond Combines the ingredients needed for etching, priming, and bonding into a single adhesive, thereby, eliminating separate etching and priming steps of the bonding process.
Ammbond7 Self Etch Bond adhesive can be used for the bonding of both direct and indirect restorations.

Key Specifications

Packaging:

Directions To Use:

• Prepare cavity. Wash thoroughly with water spray and air dry. (Do not desiccate).
• Note: For optimal adhesion, always prep (bevel) all enamel and/or margins, before application of Ammbond7.
• Shake the Ammbond7 Self Etch Bond adhesive bottle briefly.
• Note: Upon the first use, shake the adhesive bottle vigorously for 20-30 seconds.
• Dispense 2-3 drops of Ammbond7 Self Etch Bond adhesive bottle into a clean well. Replace the cap immediately after dispensing.
• Using the disposable applicator brush, apply a general amount of adhesive to the enamel/dentin surface. Scrub the surface with a brushing motion for 20 seconds.
• Apply a second layer of Ammbond7 Self Etch Bond adhesive bottle with a brushing motion for 20 seconds.
• Dry the adhesive with gentle air and then with medium air for at least 5 seconds with oil-free air.
• Light-cure for 20-30 seconds.
• Apply composite according to the manufacturer’s instructions of use.

• Clean the preparation. Wash thoroughly with water spray and dry air. (Do not desiccate).
• Shake the Ammbond7 Self Etch Bond adhesive bottle briefly.
• Note: Upon the first use, shake the adhesive bottle vigorously for 20-30 seconds.
• Dispense 2-3 drops of Ammbond7 Self Etch Bond adhesive bottle into a clean well. Replace the cap immediately after dispensing.
• Using the disposable applicator brush, apply a general amount of adhesive to the enamel/dentin surface. Scrub the surface with a brushing motion for 20 seconds.
• Apply a second layer of Ammbond7 Self Etch Bond adhesive bottle with a brushing motion for 20 seconds.
• Dry the adhesive with gentle air and then with medium air for at least 5 seconds with oil-free air.
• Light-cure for 20-30 seconds.

Warranty:

Warranty is not applicable for this product.

Manufacturer Registered Address:

AMRIT CHEMICALS AND MINERAL AGENCY
F-343, Industrial Area, Phase 8B, S.A.S. Nagar, Mohali. Punjab, India. (160071)

In Case of Complaints/Feedback Regarding Product:
Customer Care: +91 0172-509034, or write to ammdent@hotmail.com